TM 9-2330-246-14
Section I l . M A N U F A C T U R I N G I N S T R U C T I O N S (Con't)
2. Cut to 16 ft before bending.
3. Use damaged tubing as guide and bend to fit.
Figure F-16. Bulkhead to Fuel Pump Tube.
2. Cut to 20 ft before bending.
3. Use damaged tubing as guide and bend to fit.
Figure F-17. Bulkhead to Fuel Pump Tube.
2. Cut to 16 ft before bending.
3. Use damaged tubing as guide and bend to fit.
Figure F-18. Fuel Filter to Bulkhead Tube.
1. Dimension A:
M373A2D lower fuel tube: as required
M373A5 upper fuel tube: 60 in. (152.4 cm)
M373A5 lower fuel tube: 48 in. (121 .92 cm)
2. Use damaged tubing as guide and bend to fit.
Figure F-19. Heater to Bulkhead Tube.
2. Cut to 16 ft long before bending.
3. Use damaged tubing as guide and bend to fit.
Figure F-20, Heater to Fuel Filter Tube.
2. Cut to 8 ft long before bending.
3. Use damaged tubing as guide and bend to fit.
Figure F-21. Vent Tube.
F-18