TM 9-2330-381-14
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services
B-Before Operation
D-During Operation
A-After Operation
W-Weekly
Equipment
Item
Interval
ITEM TO BE INSPECTED
is not ready/
no.
B
DA
W
Procedure
available if:
10
PIVOT PIN
a. Ensure two locking pins (31) and attaching hardware
Hardware is missing.
are in place and secure.
b. Check cable guide pulley (32) for wear, cracks,
Pulley
is
cracked,
binding, and obvious damage.
severely gouged, or will
not turn.
11
FRONT SUPPORT LEG
Inspect front support leg welds and attaching/mounting
Front support
leg
is
hardware. Remove linch pin (33) and retaining pin (34).
inoperative.
Operate handcrank (35) to ensure proper operation without
binding.
2-30 Change 1