TM 9-2330-381-14
Table 3-1. Operator/Crew Troubleshooting Table - CONT
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM
25.
ALL LAMPS DO-NOT LIGHT - CONT
Step 3.
Check connectors for dirty, corroded, or damaged pins (table 2-1, item 9).
If pins are dirty, corroded, or damaged, notify unit maintenance.
26.
ONE OR MORE (BUT NOT ALL) LIGHTS WILL NOT LIGHT
Step 1.
Check for burned out or defective lamps (table 2-1, item 14). If lamps are burned out or defective,
notify unit maintenance.
Step 2.
Check for broken lead wires or loose connections.
a. If connections are loose, tighten connections (para. 2-12, step d).
b. If lead wires are broken, notify unit maintenance.
Step 3.
If light assembly is damaged, notify unit maintenance.
27.
DIM OR FLICKERING LIGHTS
Step 1.
Check electrical connections for loose, dirty, or corroded pins.
a.
If connections are loose, tighten connections (para. 2-12, step d).
b. If connector pins are dirty or corroded, notify unit maintenance.
Step 2.
If lamp is defective, notify unit maintenance.
Step 3.
Check towing vehicle lights.
If tractor has dim or flickering lights, notify unit maintenance.
3-30