TM 9-2330-381-14
REMOVAL
1.
Remove cotter pin (1), two flat washers (2), and headed shoulder pin (3) from mending plate (4), rod end clevis
(5), and slack adjuster (6). Discard cotter pin.
CAUTION
The s-cam has parts that are removed as the s-cam is removed. During removal,
be sure that none of the washers become lost or lodged in retaining ring groove or
damage to the equipment may result.
2.
Remove retainer ring (7) and retainer ring (8) from brake actuating s-cam (9). Using a soft plastic head hammer,
drive s-cam (9) from axle (10).
4-205