TM 9-2330-381-14
8.
Remove caps/plugs and install two tube elbows (8) onto step weldment (2) and secure in place with fitting nuts
(10).
9.
Remove caps/plugs and install two hydraulic tubes (7) between tube elbows (8) on step weldment (2) and tee
fittings (9).
10.
Remove caps/plugs and install two tube elbows (4) onto step weldment (2) and secure in place with fitting nuts
(6).
11.
Remove caps/plugs and install two hydraulic tubes (3) between tube elbows (4) on step weldment (2) and tee
fittings (5).
12.
Remove caps/plugs and install seven hydraulic hoses (1) onto fittings on step weldment (2).
FOLLOW-ON MAINTENANCE
1.
2.
4-88. HYDRAULIC PRESSURE GAGES
This task covers:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
The following tools can be found in common tool kit no. 1, item 17, appx. B:
Drain pan, 4 gl
Gloves, industrial
Extension light, 24 ft
Goggles, chemical and oil protective
Materials/Parts
Dry cleaning solvent, item 26, appx. E
Self-locking nut (12)
Personnel Required:
2
Change 2 4-431