TM 9-2330-381-14
11.
Secure hydraulic tank (1) in place with four nuts (2) and lockwashers (3). Tighten four nuts (2) on two clamp bolt
assemblies (5) and tighten four nuts (4) on two clamp bolt assemblies (5) down firmly against APU frame.
FOLLOW-ON MAINTENANCE
1.
2.
3.
4.
5.
4-95.
GOOSENECK CYLINDER AIR RESERVOIR
This task covers:
a. Removal
b. Inspection
c.
Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Materials/Parts
Dry cleaning solvent, item 26, appx. E
Lockwasher (4)
Equipment Condition
Gooseneck coupled to tractor or supported by gooseneck stand (para. 2-24)
General Safety Instructions
WARNING
Hydraulic fluid may be absorbed through the skin. Avoid prolonged exposure to
skin and wear long sleeves, gloves, and goggles or face shield. If hydraulic fluid
gets into the eyes, flush them immediately with water and seek medical attention.
If hydraulic fluid gets on skin, wash thoroughly with soap and water. Wash hands
thoroughly prior to eating or smoking.
Hydraulic fluid may be hot if system has been in operation. Allow time for system
to cool before performing maintenance or injury to personnel may result.
4-475