TM 9-2330-381-14
INSPECTION
1.
Inspect radiator (1) for bent or missing fins and excessive dirt that could inhibit flow of air to cooling fins.
2.
Inspect radiator (1) and block interior for excess scaling and corrosion.
REPAIR
WARNING
To avoid eye or skin injury, do not clean with compressed air in excess of 30 psi
(207 kPa). Wear goggles or face shield.
1.
Straighten fins and clean radiator fins with compressed air.
2.
If radiator is corroded, flush cooling system with hot water.
INSTALLATION
1.
Apply thread locking compound to three studs (10) and install three studs in radiator base plate (16).
4-515