TM 9-2330-381-14
4-112. FAN DYNAMO (CONT)
FOLLOW-ON MAINTENANCE
1.
2.
4-113. APU JUMP START SYSTEM
This task covers:
a. Removal
c. Installation
b. Inspection
d. Preoperational Check
INITIAL SETUP
Tools:
General mechanics tool kit, item 16, appx. B
Electrical repair kit, item 18, appx. B
Materials/Parts:
Grommet (2)
Locknut (2)
Locknut (4)
Lockwasher (1)
Lockwasher (1)
Lockwasher (1)
Personnel Required:
2
Equipment Condition:
Parked on level ground, gooseneck supported if uncoupled, and wheels chocked (para. 2-24)
REMOVAL
WARNING
Disconnect power source before performing any corrective maintenance actions.
Do not wear watches and jewelry while working on battery or other electrical
components. Always disconnect negative (-) cable first and connect it last or
injury to personnel may result. Make sure polarity (red (+) and black (-) is not
reversed.
4-520