TM 9-2330-381-14
5-17. STEERING PLATE (CONT)
23.
If either straight pin (5) has been driven out, install pin (5) into mainbeam.
24.
Apply antiseize compound to inside of large opening in retainer plate (2) and to exterior of steering plate spacer
(1).
25.
Position retainer plate (2) facing streetside. Aline and install retainer plate (2) over steering plate spacer (1).
26.
Rotate retainer plate (2) 90 degrees counterclockwise until alined with two straight pins (5) in weldment (6).
27.
Using two people and a crowbar, pry up and drive retainer plate (2) onto pins (5).
28.
Apply locking compound to threads on four capscrews (3). Install four capscrews (3) and lockwashers (4).
Torque four capscrews (3) to 150 - 160 lb-ft (151 - 217 Nm).
5-68