alter the length or shape of the
(4) Unscrew the metal fastener that
bare copper wire.
secures the impeller to the motor
shaft and remove the impeller.
Tag and remove the wire connec-
(5) Position and secure a replacement
tions from the plug-in terminals
motor in the bracket. Slide the
on the heating element.
impeller onto the motor shaft and
Remove the screws that secure the
tighten the fastener.
heating element to the cabinet. Be
(6) Replace the motor bracket in the
careful not to bend the louvers on
cabinet and connect the motor leads
the front of the cabinet during the
g. Removal and Replacement of Heating
Position the replacement element
and replace and tighten the screws.
(1) Remove the four screws that se-
Connect the wires to the plug-in
cure the motor bracket to the cab-
terminals of the heating element.
inet. Remove the motor bracket.
(2) Loosen the bolt that secures the
Replace the bare wire connected
bare copper wire from the circuit
from the circuit breaker ((2)
remove the wire.
Position the motor bracket in the
Caution: Be extremely careful
cabinet and replace and tighten the
when removing this lead. Do not