TM5895-224-15-17
TM5805-285-15-38
50. Exhaust Blower Repairs
(5) Connect the motor leads and the
p o w e r cord to the replacement capa-
a. Preliminary Procedures. Before perform-
( 6 ) Slide the capacitor into the clamp
i n g the repair procedures in b t h r o u g h d b e -
a n d tighten the screw.
l o w , remove the exhaust blower cover (para
( 7 ) Replace the power cord clamp.
3 9 a )
and remove
the power
cord connector
c. Removal and Replacement of Power Cord.
plug from its receptacle (fig. 16).
( 1 ) Remove the capacitor from the clamp
b. Removal and Replacement of Capacitor.
(b(2) through (4) above),
( 1 ) Loosen the capacitor clamp screw.
( 2 ) T a g and disconnect the power cord
l e a d s from the capacitor and motor
( 2 ) R e m o v e the power cord clamp from
leads.
t h e motor bracket.
(3) C o n n e c t the new power cord to the
Slide the capacitor out of the clamp.
c a p a c i t o r and motor leads (fig. 34).
T a g and disconnect the motor leads
and the power cord from the capaci-
( 4 ) S l i d e the capacitor into the clamp
tor terminals.
a n d tighten the screw.