TM 3-1040-262-13&P
Figure 4-2. Service Kit, M254.
4-2. Used Materiel.
4-3. Shipment and Storage Data for CS Dry Agent
Inspect used equipment as prescribed in Table 4-1.
Shipment and storage data for CS riot control agent is
contained in TM 3-250.
Section II. TOOLS AND EQUIPMENT
check the amount of air pressure in any charged air
4-4. Tools
cylinder.
b. Inline Pressure Check Gage Assembly.
No special tools are required for the disperser at
(1) Description. The inline pressure check
organizational level.
gage assembly has a dial indicating pressure gage with
scale O-to 300 psi.
4-5. Equipment
(2) Use. This gage shows the setting of the
pressure regulator.
The M254 portable riot control agent disperser service kit
(fig. 4-2) (SC 1040-95-CL-AOI) consists of
the following
c.
Nonmetallic Hose Assembly (Charging)
items:
(1) Description. The charging hose assembly
a. Pressure Check Gage Assembly.
consists of a flexible hose, nipple on one end, and
(1) Description. The pressure check gage
quickdisconnect coupling half on the other end.
assembly has a dial indicating pressure gage with scale
(2) Use. The hose assembly may be used to
0to 4, 000 psi.
connect air cylinders to an air supply for charging.
(2) Use. This gage is used during air cylinder charging.
It shows the amount of air pressure contained in the air
cylinder during charging. Also, it is used to
Change 1 4-2