DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS (Contd)
EMERGENCY ENGINE STOP CONTROLS--The emergency engine stop controls are
the two T-handle controls located below the auxiliary switch panels, and are to
be used only in the case of an emergency. When the controls are pushed in, the
engines will run. When the controls are pulled out, the engines will stop.
Pulling the emergency engine stop controls out stops the flow of fuel from the
injection pump to the injectors. The left T-handle is for the port engine and the
right T-handle is for the starboard engine.
ENGINE CIRCUIT BREAKER--Located on top of engine. Depress circuit breaker to
reset for operation of engine starting solenoid.