BEB RETRIEVAL USING CBT (Contd)
The stanchion poles weigh 60 lbs. (27.24 kg) each and require
two personnel to remove them from their pockets. Failure to
follow this warning may result in injury to personnel or
damage to equipment.
During all transporter operations, the CBT operator will drive
and be responsible for the operation of the Load Handling
System (LHS) by means of the cab or remote control boxes.
The assistant will act as a ground guide, responsible for
and assist the operator as needed.
For transporter operation, refer to TM 5-5420-234-14&P.
1. Remove front and rear stanchions poles (1) from pockets (5) on upstream side of
a. While assistant holds stanchion pole (1), remove ring pin (6) from straight
pin (7). Remove straight pin (7) from stanchion pole (1), and pocket (5).
b. Lift and remove stanchion poles (1) from pockets (5) and place into storage
brackets (4). Secure with two straps (3).
c. Place straight pin (7) into pocket (5) and secure with ring pin (6).