BRIDGE ERECTION BOAT (BEB)
SERVICE UPON RECEIPT
Upon receipt of a new, used, or reconditioned BEB, perform the following steps to
determine if the BEB has been properly prepared for service:
The operator will assist when performing service-upon-
1. Inspect all assemblies, subassemblies, and accessories to ensure they are in
proper working order.
2. Secure, clean, lubricate, or adjust equipment as required in Preventive
Maintenance Checks and Services (PMCS). Refer to WP 0046 00.
3. Check all Basic Issue Items (BII) to ensure every item is present, in good
condition, and properly mounted or stowed. Refer to WP 0051 00.
GENERAL INSPECTION AND SERVICING INSTRUCTIONS
and lubricating equipment.