TM 5-2420-230-10
This Task Covers:
a. Removal
b. Cleaning
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
References
Test Equipment
None
None
Equipment Conditions
Tools and Special Tools
TM or Para
Condition Description
None
Vehicle prepared for servicing (Do
not install FEL maintenance arm).
Materials/Parts
Drawings Required
None
Personnel Required
MOS 21J, Construction Engineering Operator
Estimated Time to Complete
6 min.
a. Removal.
(1)
Loosen knurled nut (1) and remove cap (2) from
precleaner dust bowl (3).
(2)
Remove precleaner dust bowl (3).
b. Cleaning.
(1)
Empty contents of precleaner dust bowl (3).
(2)
Use wiping rag to wipe inside and outside of
precleaner dust bowl (3).
c. Installation.
(1)
Position precleaner dust bowl (3) on vehicle.
(2)
Position cap (2) on precleaner dust bowl (3).
Tighten knurled nut (1).
d. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch.
END OF TASK
Change 1