TM 5-2420-230-10
a. General.
Headlights must be mounted on cab before
driving off-road or performing any
earth-moving operations. Failure to comply
will result in damage to equipment.
The IHMEE is provided with two headlight
positions: one for off-road driving and the other for
highway driving. Headlights should be mounted on
the bucket for highway driving, and must be
moved to the top of the windshield for off-road
driving and earth-moving operations.
b. Headlight Removal.
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry contacts battery
terminal, a direct short may result in instant
heating of tools, damage to equipment, and
injury or death to personnel.
NOTE
Procedure to remove headlights is the same for all locations. Right-side bucket position shown.
(1)
(2)
Disconnect light plug (1).
NOTE
Perform Step (3) for 4-in-1 bucket positions only.
(3)
Remove cable (2) from eye loop (3).
(4)
Loosen knob (4) until T-bar (5) can be rotated
freely.
(5)
Rotate T-bar (5) approximately 90 degrees, so
that it can fit between retaining bars on light
mount (6).
(6)
Remove headlight assembly (7) from light
mount (6).
Change 1