TM 5-2420-230-10
b. Right Joystick.
The functions of the switch and indicator
components of the right joystick are shown in
Table 6-2. Right Joystick Control and Indicator FEL Function.
Key
Description
Function
8
Transmission Cutout
This button, when pressed, disengages the transmission. The
transmission is re-engaged when the button is released. The button only
functions when the electrohydraulic circuit is switched on and when the
RANGE SHIFT switch is set to LOW.
9
Proportional Control Rotary Switch
Used by operator to control opening/closing of the 4-in-1 bucket.
10
Control Lever
The operator can raise/lower FEL/attachments and open/close bucket.
11
Hydraulic Master Switch
Pressing this button isolates the FEL, backhoe, and hose reel. This button
must be on for the FEL, backhoe, or hose reel to operate.
12
Mode Selector for Backhoe Operation
Provides three speeds for backhoe operation.
13
Float Position Indicator
Steady: Indicates when the loader arms are in the float position.
Flashing: Indicates the loader arms are in the "ready to float" position.
14
FEL Mode Selection
Three-position rocker switch.
Mode 1: Bucket 16 in. (40 cm) from the ground, default position.
Mode 2: Bucket level with the ground in normal work position.
Mode 3: Loader arms move to float position; the bucket stays in its
previous position.
15
Press this button to program the loader position into memory.
16
Return to Level/Dig/Float
Pressing this button, and at the same time pushing the joystick forward,
returns the loader to one of three preselected positions.
17
Return to Position Rocker Switch
Pressing this button returns loader to a previously programmed position.
If no preselection is made, "transport" position is automatically selected.
Change 1