TM 55-1925-282-14&P
0025 00
10
3
1
2
12
11
5
9
6
8
4
8
7
Figure 1. Filter Assembly
INSTALLATION
1. Secure the filter housing (figure 1, item 5) in place using four bolts (figure 1, item 7), eight flat washers
(figure 1, item 8), and four new self locking nuts (figure 1, item 9).
2. Install the outlet hose filter nut (figure 1, item 6) to the filter housing (figure 1, item 5).
3. Install the inlet hose filter nut (figure 1, item 4) to the filter housing (figure 1, item 5).
4. If applicable (table 1), install the gauge (figure 1, item 3) to the filter housing lid (figure 1, item 2).
5. Unscrew the filter housing lid retaining ring (figure 1, item 10), and remove it from the filter housing (figure 1,
item 5).
6. Remove the filter housing lid (figure 1, item 2) from the filter housing (figure 1, item 5).
0025 00-2