TM 55-1925-283-12&P
UNIT MAINTENANCE
FUEL FILTER/WATER SEPARATOR (FUEL TRANSFER SYSTEM) FOR
INLAND AND COASTAL LARGE TUG (LT)
FUEL FILTER/WATER SEPARATOR, REPAIR
Initial Setup:
Tools and Special Tools:
References (continued):
Tool Kit, General Mechanic's (Item 1,
Materials/Parts:
Equipment Condition:
Set to OFF the FUEL FILTER/WATER SEPARATOR
and RACOR FILTER circuit breakers on the
120V emergency distribution panel No. 1. Lock
out and tag out (FM 55-502)
Personnel Required:
CLOSE, lock out, and tag out (FM 55-502) valves
Two Watercraft Engineers, 88L
FO-16 F.O. FLTR / WATER SEP I N L E T C O V
and FO-17 F.O. FLTR / WATER SEP OUTLET
References:
COV.
FM 55-502
All engine room ventilation fans operating normally
TM 55-1925-273-10
(TM 55- 1925-273-10)
REPLACE CONTROL PANEL FUSES
REMOVAL
WARNING
Replace or repair components only after the affected circuit has been secured,
locked out, and tagged out. Performing replacement with the circuit energized
may result in injury.
1. Remove the fuse holder (figure 1, item 1) by pushing it in and turning it approximately 1/8 turn counterclock-
wise.
2. Pull the fuse holder (figure 1, item 1) and fuse (figure 1, item 2) from the socket (figure 1, item 3).
3. Pull the fuse (figure 1, item 2) from fuse holder (figure 1, item 1).
0014 00-1