TM 55-1925-284-14&P
0020 00
1
2
Figure 1. Low Pressure Air Pressure Gauge
INSTALLATION
WARNING
Removing components by means of wire brushing produces flying particles. These
particles can cause serious injury to personnel. Protective goggles, gloves, and
long sleeves must be worn at all times during wire brushing operations. Failure
to comply with this warning can result in serious injury to personnel.
1. Clean the male threads of the pressure gauge (figure 1, item 1) with a wire brush.
2. Apply antiseizing tape to the male threads of the pressure gauge (figure 1, item 1).
3. Remove the cover or plug from the MSD open pipe fitting (figure 1, item 2).
0020 00-2