TM 55-1925-285-13&P
0005 00
12. If the Remote Indicator was selected, The PUSH TO CHANGE ALARM LIMIT (PPM) pushbutton switch A2S1
(figure 6, item 1) on the remote indicator (alarm) assembly (figure 6, item 2) must be set to the proper PPM.
Select the IN PORT (15 PPM) or AT SEA (70 PPM) alarm limit by pushing the PUSH TO CHANGE ALARM
LIMIT (PPM) pushbutton switch A2S1 until the IN PORT indicator (figure 6, item 3) or the AT SEA indicator
(figure 6, item 4) illuminates.
5
POWER ON
OIL CONTENT
EXCEEDS
ALARM LIMIT
PUSH TO SILENCE
6
OIL CONTENT PPM
PUSH TO CHANGE
ALARM LIMIT (PPM)
IN PORT
AT SEA
4
3
2
1
Figure 6. Remote Indicator (Alarm) Assembly
0005 00-7