TM55-1930-203-10
Table 3-2. TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. ENGINE WILL NOT START (cont' )
d
Figure 3-4. Controls in engine vicinity.
Step 3. Inspect for closed air valve between air starter filter and lubricator.
Step 4. Inspect air tank gages on control panel for low air supply.
Fill air tanks with external air supply using air from tires as follows:
a. Close main air supply valve (fig. 3-6) on both tanks.
b. Depress and lock valve stem (fig. 3-7) in wheel to be used as air supply.
c. Open tire air shutoff valve (fig. 3-8) at miter box of wheel being used.
d. Open auxiliary air valve (fig. 3-9) in crossover line from starting air line to tire inflation line. This
valve is located port side forward under number 3 engine on the cargo well bulkhead.
3-28