TM 55-1930-203-10
1
Radiator petcock access cover
11
Cargo well pump bulkhead grating
2
Starboard cab door
12
Cargo well pump deck grating
3
Cab scuttle cover
13
Forward miter box access cover
4
Cab forward access cover
14
Hydraulic line access cover
5
Aft engine vent louver
15
Center engine vent louver
6
Large machinery hatch cover
16
Aft miter box access cover
7
Gage board access cover
17
Gage board grating
8
Small machinery hatch cover
18
Radiator deck fan grating
9
Forward engine vent louver
19
Radiator access cover
10
Deck scuttle cover
20
Marine gear access covers
Figure 3-13. Hull and Cab access covers.
b.
Maintenance. The only maintenance authorized the operator is replacing the windshield wiper arm and blade.
(a) Remove retaining screw and slip the blade from wiper arm (3).
(b) Install the new blade by slipping blade (2) on wiper arm (3) and secure in place with retaining screw.
(2)
Replace the wiper arm (3) as follows:
(a) Remove nut and washer securing arm to wiper motor shaft.
(b) Install the new arm by positioning arm (3) on motor shaft and secure with nut and washer.
(c) After installing new arm, check to see that arm is positioned properly by operating windshield wiper before
tightening the retaining nut.
3-39