TM 9-1330-200-12/TM-1330-12/1A
j. Inspect unpacked L96A1 and L97A1 anti-riot
(4) Metal foil covering gas propulsion holes
grenades, periodically. Dispose of grenades containing
missing or punctured.
the following defects:.
(5) Grenade distortion preventing insertion
(1) Damage is noted to grenade's rubber body.
into launcher (discharger).
d. Inspect unpacked M76 and M82 Smoke Screen-
(2) Electrical firing contact clips damaged,
ing Grenades periodically. Dispose of grenades contain-
bent, corroded or missing.
(3) Plastic propulsion base is cracked or dam-
(1) Grenade armed, slider/borerider extended,
aged.
showing red.
(2)
Plastic body cracked or damaged.
posal personnel for disposition.
(3) Electric firing contact clips damaged, bent,
3-8. Cleaning/Preservation
corroded, or missing.
(4)
Bore seal damaged or missing.
a. Clean grenades of dirt, mud, grease, sand, etc.,
taking care not to disturb safety devices, by wiping
off with clean, dry cloth or other nonabrasive material
posal personnel for their disposition, except where
adjustment is authorized. (See paragraph a(5) above.)
b. Wipe off light rust which can be removed from
f. Inspect unpacked M90 TA smoke screening gre-
grenade bodies with clean, dry cloth.
nades periodically. Dispose of grenades containing the
(1) Damage is noted to the grenade end cop or
aluminum body.
(2) Electrical firing contact clips damaged,
bent, corroded or missing.
posal personnel for disposition.
h. Inspect unpacked M98 and M99 non lethal gre-
nades periodically. Dispose of grenades containing the
following defects:
(1)
Damage is noted to grenade's metal body.
(2) Electrical firing contact clips damaged,
bent, corroded, or missing.
(3)
Plastic propulsion base is cracked or dam-
aged.
posal personnel for disposition.