TM 9-1375-213-12
Figure 2-21. Nonelectric and electric priming of
bangalore torpedo.
method offers the greatest assurance of detona-
fourth wrap, slip running end under all wraps
tion. Affix a nonelectric blasting cap to end of
parallel to other end and draw tight, Initiate
detonating cord and place it in demolition block
by electric or nonelectric system.
similar to nonelectric priming methods (para 2-
17a). The
system is
then initiated by a
nonelec-
(c) Alternate method No. 1 (B, fig. 2-
tric or electric assembly.
24). Tie a
4-foot length of
detonating cord
around explosive block (on top of booster, if pre-
sent) with a clove hitch with two extra turns,
Lay one end of a 4-foot length of detonating
Cord must fit snugly against blocks, and loops
cord at an angle across charge (on top of
must be pushed close together. Use an electric
booster if present). Wrap running end three
or nonelectric firing system to initiate charge.
times around block, and lay end at angle. On