TM 9-2320-211-10-1
Driver's Compartment.
c.
TRANSFER CASE lever. Is
1.
Front WINCH CONTROL lever hinge
3.
pushed down to LOW position for
lock . Is used to lock front WINCH
heavy load conditions. Is pulled
CONTROL lever in neutral position
up to HIGH position for light load
when not in use.
conditions.
NOTE
2.
Front WINCH CONTROL lever
The location of the TRANSFER
(on trucks with front winch) .
CASE lever and the front WINCH
Is moved down to H (high) or
CONTROL lever are reversed on
L (low) position to give power
some trucks. There are several
to front winch for reeling in a
differences that help to name the
load. Move to R (reverse)
position to let go of a load.
lever has 3 positions. The front
WINCH CONTROL lever has 5
positions and a hinge lock to lock
it in neutral position.
LATE MODE
EARLY MODE
LATE MODEL TRUCKS
EARLY MODEL TRUCKS
TA
053808
4-10