TM 9-2320-211-10-1
Starting the Engine Above +20F.
b.
I
FRAME 1
Make sure engine is not hydrostatically locked.
1.
2.
Step down on clutch pedal (1) , press it all the way down and hold it down.
3.
Pull ENG. STOP control (2) out as far as it will go and hold it out.
TURN BATTERY switch (3) to ON position.
4.
5.
Press engine START button (4) and hold it in for five seconds.
Stop cranking immediately if:
6.
(a) Engine starts to turn over with starter and stops.
(b) Starter sounds as if it is straining when cranking.
(c) Engine seems to be binding.
Turn BATTERY switch (3) to OFF position and tell organizational maintenance.
7.
If there is no sign of hydrostatic lock, push ENG. STOP control (2) all the way
8.
in.
GO TO FRAME 2
TA
053835