TM 9-2320-211-10-1
I
FRAME 7
1.
On wrecker trucks for recovery of heavier loads, if field chocks are needed to
hold truck in position:
(a) Using adjustable wrench, take out stowage bolts ( 1) holding ball end of
field chocks (2) to shipper ( 3).
(b) Using 9/16-inch box wrench and adjustable wrench, take out stowage bolts
(4) and nuts (5) holding other end of field chocks (2) to shipper (3).
(c) Take field chocks (2) off the shipper (3) .
(d) Screw stowage bolts (1) back into shipper (3) so that they will not get
lost .
(e) Place stowage bolts (4) back into holes in shipper and screw on nuts (5).
GO TO FRAME 8
TA
053868
4-71