TM 9-2320-211-10-1
(3) For heavy loads.
For heavy loads:
1.
(a) Use a double sheave snatch block (1) and a single sheave snatch block (2)
as shown.
(b) Use field chocks (3) at the rear of the truck. Steps for putting field
chocks (3) in rear are the same as for the front. Refer to operation of
(c) Hook front winch cable (4) to a utility pole, tree, or ground anchor with
utility chain (5) and take up cable (4) slack. Refer to operation of front
HEAVY LOAD REAR RECOVERY
TA 081009
4-171