TM 9-2320-211-10-1
1.
Place boom jacks (1) at right angles to ground.
2.
Place tie bar (2) between boom jacks (1) and aline holes.
3.
Place tie bar pins (3) through holes and make fast with pins (4).
4.
Place boom jack base plates (5) on ends of boom jacks (1) and aline holes.
5.
Put boom jack pins (6) through holes and make fast with pins (7).
6.
Push BOOM control lever (8) away from operator to lower boom (9) slightly
to put boom load on boom jacks (1).
GO TO FRAME 4
4-194