TM 9-2320-211-10-1
FRAME 2
1.
To make outriggers fast:
(a) Put jack adjusting bar (1) in hole in adjusting screw (2).
(b) Turn adjusting screw (2) with bar (1) until base (3) does not touch
ground.
(c) Turn base (3) by hand as far as it will go to raise it further off the
ground.
(d) Unlock pin (4) and take it from the end of L-shaped retaining pin (5).
(e) Pull out L-shaped retaining pin (5).
(f) Lift outrigger (6) up to level position and push it into outrigger frame
tube (7).
(g) Aline holes in outrigger frame tube (7) and hole (8) in base of
outrigger (6).
(h) Push L-shaped retaining pin (5) through holes.
(i) Push pin (4) through hole in end of L-shaped retaining pin (5) and
lock it.
GO TO FRAME 3
4-200