TM 9-2320-211-10
Capnuts are used to secure spare wheel to spare wheel mount.
17
Spare wheel retaining clamp is swung open to remove spare wheel.
18
Retaining clamp capnut is removed to release retaining clamp assembly.
19
Tensioner lever is used to apply
20
tension on the winch cable during
cable rewind without a load.
Level wind lock knob is pulled out and
21
rotated 90 to unlock the level wind
assembly.
Level wind assembly feeds winch cable
22
onto drum in tight even coils and
layers.
23
Drum clutch lever is used to engage
and disengage the winch drum.
Drum lock knob is pulled out and
24
rotated 90 to unlock winch drum.
25
Tensioner lever latch is pulled out and
rotated 90 to release tensioner lever.
TA 096210