TM 9-2320-269-10
INSTRUMENT PANEL CONTROLS - CONTINUED
KEY
CONTROL OR INDICATOR
FUNCTION/USE
CAUTION
To disengage the power divider, move control lever from the "IN" (locked) position at LOW VEHICLE
SPEED only, and NEVER when the rear wheels are slipping.
4
POWER DIVIDER LOCK
Control moved to IN position engages rear aft axle to the forward rear
axle. Control moved to OUT position disengages the aft axle. Power
divider used for pulling heavy loads or for traction when moving over
rough terrain.
CAUTION
It is important to allow engine to idle from three to five minutes before shutting down, to avoid seals, and
the like feature, being damaged by engine heat which rises when the coolant is not recirculating.
5
ENGINE STOP CONTROL
Stop engine operation by pulling handle out. Used for "EMERGENCY
SHUT DOWN" should the need arise. Pull OUT to shut down, push
IN before starting engine. Engine won't start unless handle is pushed
all the way In.
TA 222516
2-7