TM 9-2320-269-10
BODY WINCH CONTROLS-REAR OF TRUCK
Key
Control or Indicator
Function/Use
5
BODY WINCH CLUTCH
To engage body winch drum. Pull
CONTROL
OUT to engage, push IN to
disengage.
6
BODY WINCH HANGER
Control has three positions, high,
BEARING CONTROL
low and neutral. Pull OUT for high
speed, push all the way IN for low.
Neutral is the halfway position, be-
tween high and low. Control is used
to select winch payout and take up
speeds.
WARNING
LOOSE OR FRAYED WIRE CABLES
Always wear heavy leather gloves when handling winch wire cables.
Never let wire cable run through your hands; frayed cables can cut you.
Never operate a winch with less than four turns of cable on the drum.
Keep cable coils tight and close together on the drum. while winching.
7
BODY WINCH CONTROL LEVER
Pulling rearward to pay out the winch
cable, and pushing FORWARD takes up
the winch cable.
TA 222540
2-31