TM 9-2320-269-10
OPERATING THE BODY WINCH - CONTINUED
1.
Driver moves the load by pushing the winch control lever (1) FORWARD to the "TAKE UP" position (2).
2.
Assistant at the winch makes sure cable (3) coils are tight and together on the winch drum.
3.
When load Is moved into position or to stop the winch, move winch control lever (1) to center Neutral position.
Winch drum should brake automatically.
4.
Assistant removes the swivel jaw hook (4) from load, unsnaps lock pin (5), removes clevis pin (6) and
shackle (7) from cable end (8), assembles the shackle (7) into swivel jaw hook (4) and stows the swivel hook
assembly.
TA 222597
2-105