TM 9-2320-269-10
USING EMERGENCY POWER
NOTE
The emergency power system should only be used to bring the derrick leg down. Put it in
stowed position, and raise the outriggers in the event engine stalls and will not re-start.
Setting the Cab Controls
1.
Turn key switch (1) to ON position (2).
2.
Pull emergency power switch (3) OUT. Indicator light (4) will come ON.
Operating the Derrick Controls
1.
Push emergency button (5) and hold it in.
2.
While holding button (5) in, operate the necessary derrick controls to bring it down and place into stowed
position.
TA 222601
2-112