TM 9-2320-269-10
MOUNTING THE BASKET(S) TO THE BASKET SUPPORTING BRACKETS - CONTINUED
3.
Remove click pin lockring (5) and pin (6) from the basket support bracket (3).
4.
With help from assistant, lift basket (1) and position bracket (4) to inside of support bracket (3). Make sure
cut out (7), bottom of bracket (4), slips over and rests on pin (8), inside support bracket (3).
5.
Secure basket (1) to support bracket (3) by inserting pin (6) through holes (9), and secure with click pin
lockring (5).
WARNING
The baskets should never be used without the liners installed. The liners give them extra
strength and insulation protection.
6.
Before raising or lowering the derrick leg (2), make sure you release the basket lock (10), so you maintain a
level position as you raise or lower.
7.
When you reach the angle of elevation you desire, secure the basket position by locking the basket lock (10).
NOTE
The basket locks are Identical and lock or unlock in the same way in either basket.
TA 222613
2-125