TM 9-2320-269-10
OPERATION-AUXILIARY EQUIPMENT - CONTINUED
TAMPER
1.
Connect hydraulic lines (1) and (2) to the truck hydraulic power source outlets (3).
2.
Connect the other ends of hydraulic lines (1) and (2) to the tamper (4).
3.
Have assistant pull the pole puller control handle (5) back, while you hold
tamper (4).
4.
The tamper (4) will continue to operate until the control handle (5) is pushed forward.
CHAINSAW
1.
Connect hydraulic lines (1) and (2) to the truck hydraulic power source outlets (3).
2.
Connect the other ends of hydraulic lines (1) and (2) to the chainsaw (6).
3.
Pull the pole puller control handle (5) back. The control handle (5) will stay In this position until you
push it forward.
4.
Pull the trigger (7) on chainsaw (6) to start cutting operation.
Release trigger (7) to stop the
chainsaw (6).
TA 222626
2-140