TM 9-2320-269-10
TROUBLESHOOTING TABLE - CONTINUED
STEERING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
If you have any of the following additional truck malfunctions, notify organizational maintenance.
Hard steering
No recovery from turns to straight ahead
Front wheel shimmy
Noise
Excessive or uneven tire wear
Wheel wobbles
Wanders, pulls to one side
WINCHES
WARNING
Always wear heavy leather gloves when handling winch wire cables. Never let wire cables run through your
hands; frayed cables can cut you. Never operate the winch with less than four turns of cable on the drum. Keep
cable coils tight and close together on the drum while winching.
One or both winches will not operate.
CAUTION
Do not engage the PTO while engine Is running. Serious damage to transmission can occur.
Check if PTO lever is engaged or disengaged.
See page 2-94 through 2-105 for correct winch operating procedures.
Winches unusually noisy while in operation.
Check lubricant levels.
See LO 9-2320-269-12.
3-29