TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(33) Remove tow lights cable (36) from stowage and connect to rear
electrical connector (37) on wrecker.
(34) Route other end of tow light cable (36) to emergency tow lights (29) on
disabled vehicle and plug in at connector (38).
(35) Set POWER switch (39) to ON position.
(36) Set HIGH IDLE switch (40) to CONTINUOUS.
(37) Push and release LATCH switch (41). Engine speed will increase to
approximately 1500 rpm.
2-175