TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
NOTE
Right and left adapters are removed the same way.
Right side shown.
(21) Drive wrecker forward several feet and park (para 2-1lo).
(22) Install two pins (22) and quick pins (21) in two adapters (23). Install
pins (26) and quick pins (25) in two adapters and stow.
CAUTION
Do not contact pintle hook with lift cylinder.
Equipment damage could result.
(23) Lower lift tube (19) to ground.
(24) Disconnect two springs (18) from tow cylinders (20).
(25) Remove two quick pins (28), pins (29), and end caps (30) from
crosstube (24).
2-341