TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(13) Install two 5-in. (127 mm) spacers (16) and two 4-in. (102 mm)
spacers (17) on crosstube (7).
NOTE
Make sure metal connector is located on either side of
belt brace and does not touch metal parts of adapters.
(14) Install two M880 adapters (15) on crosstube (7) with brace (18) facing
inside.
NOTE
End caps will hang over end of crosstube for M880
adapters.
(15) Install two end caps (10) on crosstube (7).
(16) Install two pins (9) and quick pins (8).
(17) Attach two springs (1) on tow cylinders (2).
2-395