TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-82. TOW M939 (CONT).
(39) Route other end of tow light cable (37) along disabled vehicle and
connect to rear electrical connector (38) on wrecker.
If disabled vehicle will be lifted and towed, continue
with step (40).
If disabled vehicle will be towed with all tires on
paved roads only, raise crosstube enough to partially
unload disabled vehicle's front suspension. Keep
front tires in firm contact with ground and proceed
to step (45).
(40)
Lock disabled vehicle's steering (refer to M939 operator's manual).
(41)
Set POWER switch (39) to ON position.
(42)
Set HIGH IDLE switch (40) to CONTINUOUS,
(43)
Push and release LATCH switch (41). Engine speed will increase to
approximately 1500 rpm.
2-500