TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(20) Release PARKING BRAKE
and place transmission in
neutral on disabled vehicle
(refer to M1008 operator's
manual).
CAUTION
Do not contact pintle hook with
lift cylinder. Equipment damage
could occur.
(21) Operate retriever controls
to lower adapters (15)
under front bumper (20)
and up against front
springs (21).
(22) Apply PARKING BRAKE
and place transmission in
PARK on disabled vehicle
(refer to M1008 operator's
manual).
(23) Route one 12-ft (3.5 m) tow
chain (22) behind front
axle (23) and loop over leaf
spring (24) on disabled
vehicle.
(24) Route 12-ft (3.5 m) tow
chain (22) through adapter
grab hook (25).
(25) Pull chain tight and attach
grab hook (26) to chain near
adapter grab hook (25).
(26) Repeat steps (23), (24), and
(25) for other side.
2-611