TM 9-2320-279-10-2
M 9 8 4 E 1 General Operating
Procedures (Cont)
(13) Install two 4-in. (102 mm) spacers
(16) on crosstube (7).
NOTE
Make sure metal connection is located on either side of
belt brace and does not touch metal parts of adapters.
(14) Install two M1OO8 adapters (15) on crosstube (7) with stiffener (17)
facing inward.
(14.1) Install two 5-in. (127 mm) spacers (18) on crosstube (7).
NOTE
End caps will hang over end of crosstube for M1008
strap adapters.
(15) Install two end caps (10) on crosstube (7).
(16) Install two pins (9) and quick pins (8).
(17) Attach two springs (1) on tow cylinders (2).
Change 1