TM
9-2320-279-10-2
Preparation for Transport and Operation (Cont)
E-13. EQUIPMENT BODY REMOVAL/INSTALLATION (CONT).
(13) Remove HEAVY-DUTY WINCH REMOTE CONTROL (19) and remote
control cable (20) from stowage.
(14) Clean dirt and water from cable ends (21) and receptacle (22).
CAUTION
Do not activate HEAVY-DUTY WINCH switch. If
activated it may cause winch to move and cause
damage to equipment.
(15) Connect remote control cable (20) to HEAVY-DUTY WINCH REMOTE
CONTROL (19). Check that HEAVY-DUTY WINCH switch (23) is set to
OFF.
(16) Remove cover (24) from receptacle (25). Clean any dirt or water from
receptacle.
(17) Connect remote control cable (20) to receptacle (25).
E-6