TM 9-2320-285-10
3-4.
TROUBLESHOOTING TABLE (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. ENGINE WILL NOT CRANK (Continued)
Step 2 (continued).
a. Press red reset button on 70-ampere circuit breaker.
b. If engine still will not crank, go to step 3.
Step 3. Check cable connections to starter motor, solenoid, and 70-ampere circuit breaker for looseness.
a. If connections are tight, go to step 4.
b. If connections are loose, notify organizational maintenance.
WARNING
Battery box lid is heavy. Do not allow battery box lid to fall on you. If you are injured, obtain medical aid
immediately.
Step 4. Remove padlock from battery box hasp. Raise lid and check for loose,
corroded, or damaged battery cables and connections.
If battery cable connections are loose, or if cables or connections are damaged or corroded, notify
organizational maintenance.