TM 9-2320-360-10
Section I. DESCRIPTION AND USE OF OPERATOR'S
CONTROLS AND INDICATORS
2-1. INTRODUCTION
This section shows location and describes use of controls and indicators used to operate HET Tractor.
Operator/crew must become thoroughly familiar with contents of this section before attempting to operate
HET Tractor.
2-2. DESCRIPTION AND USE OF CONTROLS AND INDICATORS
Know location and proper use of every control and indicator before operating HET Tractor.
Use this
section to learn about each control and indicator to be used.
MAIN INSTRUMENT PANEL CONTROLS AND INDICATORS
1
Left Turn Indicator
Flashes (green) when left turn signal is on.
2
High Beam Indicator
Lights (blue) when HET Tractor headlights are on high.
3
PTO Indicator
Lights (green) when PTO control switch is in on position.
4
LOW AIR Indicator
Lights (red) and remains lit until air system pressure is greater than 60 psi (414 kPa). Warning
alarm sounds at the same time indicator is lit.
2-2