TM 9-2320-360-10
Table 3-1. Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE
1.
ENGINE WILL NOT CRANK WHEN ENGINE SWITCH IS TURNED TO START.
Step 1.
Check if IGNITION circuit breaker has been tripped.
Reset IGNITION circuit breaker if it has been tripped.
Step 2.
Check if transmission range selector is positioned in N (neutral).
Position transmission range selector in N (neutral).
Step 3.
Check wires and cables connected to batteries for dirty, loose, or broken connections.
Tighten loose cable connections. Notify unit maintenance if cable or
wire connections are broken, damaged, or dirty.
3-5